HYDAC EDS 4300型電子壓力開關性能優點
德國HYDAC賀德克EDS 4300系列的可編程電子壓力開關專門開發,旨在將緊湊,堅固和便宜的設備的優點與可編程壓力開關的優點相結合。 EDS 4300可以通過HPG 3000編程設備進行簡便編程。如果編程設備和EDS 4300之間的連接分開,則所有設置將在壓力開關中保持有效。這可以防止未經授權或不正確修改所做設置的可能性。可以修改以下參數: - 開關點 - 滯后 - 開關方向(開/關) - 開關延遲時間EDS 4300適用于低壓應用(zui高16 bar),并配備有壓力測量單元,陶瓷膜片上的層狀DMS。與客戶定制的*性壓力開關相比,可編程EDS 4300減少了變型的數量,這對于倉庫存儲具有積極影響。
選擇1或2個開關輸出
PNP或NPN開關輸出之間的選擇
高開關量輸出性能
精度±1%FS
免費,個人編程
緊湊而堅固的設計
ATEX版本也可用于爆炸危險區域。
*調整版本也可用于OEM應用程序
HYDAC EDS 4300型電子壓力開關性能優點
Available versions:
Standard; ATEX
The programmable electronic pressure switch of the series EDS 4300 was specially developed in order to combine the advantages of a compact, robust and inexpensive device with the virtues of a programmable pressure switch. The EDS 4300 can be programmed conveniently and simply with the HPG 3000 programming device. If the connection between the programming device and the EDS 4300 is separated, then all of the settings will remain in effect in the pressure switch. This prevents the possibility of unauthorised or incorrect modification of the settings being made. The following parameters can be modified: - Switchpoint - Hysteresis - Switching direction (closer / opener) - Switching delay times The EDS 4300 is suitable for low-pressure applications (up to 16 bar) and is equipped with a pressure measurement cell with thick-layer DMS on a ceramic diaphragm. In comparison with the customer-specific permanently set pressure switches, the programmable EDS 4300 reduces the number of variants, which has a positive effect in terms of warehouse storage.
HYDAC EDS 4300型電子壓力開關性能優點